Wovam Precision Machinery Technology Co. Ltd
English
日本語
Home
Solution
Screw Bolt
Combination Screw
Washer
Nut
About Us
Company Profile
Contact Us
News
English
English

Language

Language
English Français
Save

Wovam Precision Machinery Technology Co. Ltd

Request Quote
  • Home
  • Solution
    Screw Bolt Combination Screw Washer Nut
  • About Us
    Company Profile
  • Contact Us
    Contact Us
  • News
    Company News Industry News

What Parameters Must Be Specified on Drawings for Custom Non-Standard Screws?

Views :
Update time : 2026-11-23 09:45:13

Standard fasteners can be ordered directly by their part number, but non-standard parts have no catalog to refer to. The drawing is the sole technical basis for the manufacturer to understand the product, assess the process and prepare the quotation. When a parameter is missing, the manufacturer must assume values from experience, which can lead to sample rework, assembly interference or even fracture in service. Complete specification of every element aligns understanding before inquiry, shortens communication and makes quotations comparable.

1. Basic Part Information and Reference Standards

The first page of the drawing should identify the part: part name, internal drawing number, revision and drawing date. If the part is modified from an existing standard fastener, state the reference standard (e.g. GB/T 70.1, DIN 912, ISO 4762) and list each deviation one by one, such as an extended shank or shortened thread length. The revision prevents old and new drawings from being mixed; any change must be issued as a new revision with a note. When model files such as STEP, DWG or DXF are attached, the PDF drawing remains the controlled official document.

2. Geometry and Dimensional Tolerances

From the assembly perspective, the geometry determines whether the part fits the available space. The drawing must show the head style (hex head, flange head, socket head, pan head, countersunk head, T-head, etc.) and drive type, and specify shank diameter, overall length, thread length and plain shank length, head diameter and head height, across-flats dimension, plus additional features such as shoulders, cross holes, slots and flats. The end chamfer and underhead fillet radius should also be given; sharp transitions create stress concentration and reduce fatigue life.

Within the drawing workflow, the dimension chain must be closed; the manufacturer should not have to reverse-engineer dimensions from photos or samples. Tolerances are applied only to mating and functional dimensions, such as the shank diameter fitting a hole or the clamping section that controls the grip length. Non-mating dimensions may reference a general tolerance standard such as GB/T 1804-m (equivalent to ISO 2768-m). Marking every dimension to a tight tolerance causes the part to be produced as a precision component, raising inspection cost and scrap rate.

3. Complete Thread Specification

When specifying threads, the most commonly omitted item is the full designation. A complete designation includes the thread system, size and pitch, tolerance class, hand and thread length: a metric thread is written M8×1.25-6g; the pitch may be omitted for coarse threads, and right-hand threads are not marked for hand. Unified inch threads are marked UNC or UNF. The two systems are not interchangeable and cannot be substituted based on a similar outer diameter. External threads commonly use tolerance class 6g, internal threads 6H. When coating is required, state whether dimensions are specified before or after plating.

The thread length must distinguish fully threaded from partially threaded, with the plain shank length stated. The end form (chamfered end, plain end, pilot end, etc.) should be written according to assembly requirements. If the fastener screws into plastic, aluminum or thin sheet, the mating material should be noted; the tapped or self-tapping thread form is designed accordingly, and a wrong choice can cause stripping or cracking.

4. Material and Mechanical Properties

The material should not be described only as "carbon steel" or "stainless steel"; state the grade and the standard it follows. Common grades include 45# steel (GB/T 699), 40Cr alloy steel (GB/T 3077), and stainless grades 304 and 316 (GB/T 20878). Mechanical properties are given by property class. For carbon and alloy steel bolts, screws and studs, GB/T 3098.1 applies: the number before the decimal is one-hundredth of the nominal tensile strength (MPa), and the number after the decimal is ten times the yield-to-tensile ratio. Class 8.8 has a nominal tensile strength of 800 MPa and yield strength of 640 MPa; class 10.9 is 1000 MPa and 900 MPa; class 12.9 is 1200 MPa and 1080 MPa. Stainless parts are marked A2-70, A4-80 and similar classes.

When hardness is used as an acceptance criterion, state the hardness range and inspection location. Requirements for quenching and tempering, case hardening, or retaining toughness for assembly deformation should also be noted in the technical requirements. The property class describes strength, while the product grade (A or B) describes tolerances; the two should not be mixed up.

5. Surface Treatment and Corrosion Protection

For surface treatment, specify the process name, coating thickness requirement and acceptance method, rather than writing only "zinc plated" or "rust-proof". Common processes include black oxide, electrogalvanizing, Dacromet, nickel plating, hot-dip galvanizing and stainless steel passivation. Corrosion resistance is accepted by the duration of the neutral salt spray test, according to GB/T 10125. The coating changes thread dimensions, so threads must be rechecked with go/no-go gauges after plating. Parts above class 8.8 should undergo hydrogen embrittlement relief after plating, with records kept, to avoid delayed fracture.

6. Special Requirements, Inspection and Commercial Information

Where special functions are involved—locking, sealing, insulation, electrical conductivity, head marking, etc.—the drawing should state the functional requirement and verification method, such as a tightening torque range, a locking test or a pull-out force requirement. Inspection items (hardness, tensile or proof load, salt spray, thread go/no-go gauges), material certificates and batch traceability requirements should be specified in the technical requirements or inquiry documents.

From the procurement perspective, sample quantity, first-batch quantity, annual volume, packaging, lead time and shipping terms are commercial information, usually placed on the inquiry sheet rather than in the drawing's technical notes. They directly affect the process and quotation, so they should be provided together with the drawing.

Before sending the drawing, check item by item against "basic information—geometry—thread—material and properties—surface treatment—inspection requirements". With complete information, the manufacturer can assess feasibility in one pass and provide comparable quotations. If some parameters are not yet settled, describe the operating conditions and loading; both sides' engineers can evaluate them together, rather than leaving blanks for the manufacturer to assume. For custom non-standard screws, you may send the drawings to Jinsixi Hardware; we will verify the elements and confirm samples and trial assembly before arranging mass production.

Summary: What Information to Provide the Manufacturer for Custom Non-Standard Screws

In summary, when sending a custom non-standard screw inquiry, the drawing and inquiry documents should cover the following six categories:

Basic information: part name, internal drawing number, revision, drawing date; when referencing a standard fastener, state the standard number and each deviation.

Geometry and dimensions: head style and drive type; shank diameter, overall length, thread length, plain shank length, head diameter and head height, across-flats dimension; features such as shoulders, cross holes, slots and flats; chamfer and underhead fillet radius. Tolerances are marked on mating and functional dimensions; non-mating dimensions reference a general tolerance standard.

Thread specification: thread system, size and pitch, tolerance class, hand, thread length and end form; mating material noted where necessary.

Material and properties: material grade and standard, property class or hardness range and inspection location, heat treatment such as quenching and tempering or case hardening.

Surface treatment: process name, coating thickness, salt spray acceptance standard; hydrogen relief after plating for high-strength parts.

Inspection and commercial information: inspection items, material certificate, batch traceability, sample quantity, first-batch quantity, annual volume, packaging, lead time and shipping terms.

With complete information, the manufacturer can accurately assess the process and feasibility and provide comparable quotations. When parameters are not yet settled, describe the operating conditions and loading for joint engineering confirmation.


Related News
Read More >>
JINSIXI
Cell phone/wechat: +86 15190146639
Facebook: 18122867382
Email: henry@jsxmetal.com / zhang.jw0991@jxsmco.com
Skype: teambase2
Add.: 299 Yishen Road, Bacheng Town, Kunshan City, Jiangsu Province,China
About Us
Company Profile
Solution
Screw Bolt
Combination Screw
Washer
Nut
Contact Us
Contact Us
JINSIXI © All Rights Reserved.